Contact
- Lot 18, Jln. Sultan Hishamuddin 1, Kaw. Perusahaan Selat Klang Utara, 42000 Pel. Klang, Selangor, Malaysia
- [email protected]
- bomatec.com
As the most recent member of Bomatec, Bomatec (Malaysia) Sdn. Bhd. joined the group in November 2014. As a specialist in the production of plastic-bonded magnets, Bomatec (Malaysia) Sdn. Bhd. is the optimal addition to the previous Group. Following investment in new production facilities, Bomatec (Malaysia) Sdn. Bhd. is fully equipped in accordance with the latest technological standard and therefore in the optimal position to manufacture plastic injection-moulded permanent magnets, components etc. for your various applications. In order to ensure quality there is an in-house test laboratory with the latest equipment. As a production site, Bomatec (Malaysia) Sdn. Bhd. is certified by the certification company Intertek according to IATF 16949:2016, the quality management standard ISO 9001:2015 and the environmental standard ISO 14001:2015.
- Company: Bomatec (Malaysia) Sdn Bhd
- Legal Representative: Boey Kok Leng
- Year Established: 2014
- Address: Lot 18, Jln. Sultan Hishamuddin 1, Kaw. Perusahaan Selat Klang Utara, 42000 Pel. Klang, Selangor, Malaysia
- Phone: +603 3176 5762 / +603 3176 2667 / +603 3176 4634
- Fax: +603 3176 4893
- Email: [email protected] / [email protected] / [email protected] / [email protected] / [email protected] / [email protected]
- Website: bomatec.com
Products: AlNiCo Magnets, Hard-ferrite Magnets, NdFeb Magnets, SmCo Magnets, Plastic-Bonded Magnets, Assemblies, Resolvers, R/D Converters, Encoders, Soft Magnetic Materials
Location
Similar Firms
AME Engineering Industries Sdn Bhd
PLO 3, Jalan Persiaran Teknologi, Taman Teknologi Johor, 81400 Senai, Johor Darul Takzim, Malaysia
AME Engineering Industries Sdn. Bhd. is the local dominant player in construction and structural steel industry. It was established in 2008 to facilitate AME group of companies as part of strategic management planning. Since her inception, state-of-the art computerized equipment and Tekla steel
International Brass Industries Sdn Bhd
No.1, Jalan Perusahaan Utama, Taman Industri Selesa Jaya, 43300 Balakong, Selangor, Malaysia
IBI was established in the year 2003 and is presently Malaysia’s largest fully integrated and environmental-friendly manufacturer of superior quality extruded brass rods, wires and profiles. The company is located at Balakong, Selangor. The company produces brass rods and wires in conformance
Central Aluminum Manufactory Sdn Bhd
Batu 12, Jalan Hutan Melintang, 36400 Hutan Melintang, Perak, Malaysia
Central Aluminium Manufactory Sdn Bhd (CAMSB) is principally engaged in manufacturing of aluminium and stainless steel products. CAMSB’s products are marketed in Malaysia and captured the markets in more than 10 countries. CAMSB is a wholly owned subsidiary of CAM Resources Berhad, a public
Intech Intergrated Sdn Bhd
Lot 3, Jalan Sultan Mohamed 4, Kaw. Perindustrian Bandar Sultan Sulaiman, 42000 Pelabuhan Klang, Selangor Darul Ehsan, Malaysia
Incorporated in 2002, our company has come a long way from the initial set-up of 5 employees to the current team of more than 130 employees. Production activities from a single plant operating in a 3-cycle rotation shift had been upgraded with an additional plant and work shifts. Production in both
CAO Minerals Sdn Bhd
Lot 180331 & 195589, Kawasan Perindustrian Keramat, Pulai, Off Jalan Simpang Pulai-Cameron, Mukim Sungai Raia, 31300 Keramat Pulai, Perak, Malaysia
Established in 2010 in Ipoh, Malaysia, CAO Minerals Sdn Bhd has grown from a modest operation to a trusted international producer and distributor of premium quality coated and uncoated calcium carbonate powder. Our strict quality controls ensure a consistent standard of high quality unpolluted
Ajiya Safety Glass Sdn Bhd
No 6, Jalan PPU 3, Taman Perindustrian Puchong Utama, 47100 Puchong, Selangor Darul Ehsan, Malaysia
Ajiya Berhad (“Ajiya”) and its group of companies (“the Group”) started as a metal roll forming company in 1990 using the brand name “AJIYA”. In 1996, the Group ventured into production of high value-added safety glass products. Ajiya products cater to a wide variety of users, from
Glucera Sdn Bhd
Level 2, Block D, Wisma Hume, PJ City Development, 15A, Jalan 51A/219, 46100 Petaling Jaya, Selangor Darul Ehsan, Malaysia
With nearly 50 years of manufacturing experience. Guocera is the tile brand of choice in over 50 countries from the America and Europe to the Middle East and Asia-Pacific. Guocera is one of Malaysia’s largest manufacturers and exporter of tiles. Whether residential, commercial space or public
CRT Manufacturing Sdn Bhd
25 Jalan 31/47, Kota Kemuning, Seksyen 31, 40460 Shah Alam, Selangor Darul Ehsan, Malaysia
As a leader in our industry, we help our customers and partners build and manage high-performance operations to rapidly achieve more efficient and effective business impact. Company: CRT Manufacturing Sdn Bhd Address: 25 Jalan 31/47, Kota Kemuning, Seksyen 31, 40460 Shah Alam, Selangor Darul
Colorcoil Industries Sdn Bhd
KM 25, Off Tuaran Road, Telipok, 88450 Kota Kinabalu Sabah, Malaysia
Colourcoil Industries is a well-established Malaysian owned company specializing in the manufacturing of prepainted steel coils (i.e. color coated steel coils). We are the first in Asia Pacific to feature the latest State-of-the-Art infra-red coil coating technology producing high quality
Hoshin Kenzi Sdn Bhd
No. 9 & 11, Jalan Mega 1/8, Taman Perindustrian Nusa Cemerlang, 79200, Bandar Nusajaya Johor, Malaysia
Hoshin Kenzi was incorporated in 1993 as the Steel Center specializing in the supply and distribution of customer’s required sizes in Ferrous and Non-Ferrous materials. Hoshin Kenzi is committed to our “Delivery on Time” system to Customers. To meet this commitment we stock
EC Excel Wire Sdn Bhd
Lot 77A, Lorong Gebeng 1/7, Gebeng Industrial Estate, 26080 Pahang, Malaysia
EC EXCEL WIRE SDN BHD, formerly known as East Coast Wire & Hardware SDN BHD, was incorporated on year 2005. EC EXCEL WIRE SDN BHD is a well-established mesh & wire manufacture and which have more than 8 years experience in Malaysia. Our company manufactures and distributes steel wire mesh
Eko Metal Industries Sdn Bhd
Lot 667 & 668, Juru 14000 Bukit Mertajam, Pulau Pinang, Malaysia
EKO’s progressive growth is driven not only by our desire to bring high quality die casting and sheet metal parts to our customers, we do also provide MECHANICAL SUB ASSEMBLY PROCESS in our control room yet exceed customer expectations and prove that we are the best, while at the same time