Contact
- No. 1, Jalan Sri Plentong 6, Taman Perindustrian Sri Plentong, 81750 Masai Johor, Malaysia
- [email protected]
- hsinglung.com.my
Our company, Hsing Lung Sdn. Bhd. (157460-D), started its modest beginning in 1989, specializing in the manufacture of PVC (POLYVINYL CHLORIDE) compound to cater for the various requirements of our customers.
Our founder, Dr Chua Kee Lam, whom holds a PH.D. degree in chemistry from McMaster University, Hamilton, Ontario, USA, has vast knowledge and experience in compounding and other chemical industries.
Starting from a small organization, the company had grown to be known as an innovative and responsive establishment, manufacturing high quality products. We are committed to responding promptly and providing a high level of service to our valued customers. With their strong support as well as hard work and dedication of our people, the company has grown from strength to strength. This had also been accompanied with rapid acceleration in technical and organizational development. Currently, we are the biggest PVC compound manufacturer in Malaysia. Our holding company, Karyon Industries Berhad is a public listed company on the Main Board of the stock exchange of Malaysia.
- Company: Hsing Lung Sdn Bhd
- Year Established: 1989
- Address: No. 1, Jalan Sri Plentong 6, Taman Perindustrian Sri Plentong, 81750 Masai Johor, Malaysia
- Phone: +60 7386 4198
- Fax: +60 7388 3199
- Email: [email protected]
- Website: hsinglung.com.my
Products: PVC Compound, Thermoplastic Compound, Flexible Hoses
Location
Similar Firms
Hong Tai Industries Sdn Bhd
16, Jalan Tiaj 2/6, Taman Industri Alam Jaya, 42300 Puncak Alam, Selangor, Malaysia
Hong Tai Industries is a leading PVC car mat manufacturer based in Malaysia. Despite our relatively young establishment, we have successfully grown from strength to strength which begin with the ability to satisfy our customer's need. With innovation and excellence as our core values, our company
Insa-Alliance Sdn Bhd
Plo 64 & Plo 65, Jln Kejuruteraan 4, Kaw. Perindustrian, Jln Genuang, 85000 Segamat, Johor, Malaysia
Insa-Alliance was established in 1995. Its solely operating in Segamat, Johor. It is 100% owned by Malaysian. INSA manufactures high quality Flexible Intermediate Bulk Container (F.I.B.C ), which is also known as bulk bag; especially for various industrial’s applications such as chemical
Allbright Industries (M) Sdn Bhd
No. 2, Jalan Sri Plentong 4, Taman Perindustrian Sri Plentong, 81750 Masai, Johor, Malaysia
In the year 1998, Dr Chua Kee Lam, who held a PhD. degree in chemistry from McMaster University, Ontorio, Canada, established Allbright Enterprise Sdn Bhd, to produce calcium stearate and zinc stearate, supplying to plastic industries. In the year 2000, the company changed its name to Allbright
Holy Rubber Industries Sdn Bhd
Lot No.3, Jalan Utarid U5/14, Seksyen U5, 40150 Shah Alam, Selangor Darul Ehsan, Malaysia
With a monitored and streamlined production system in place, Holy Rubber provides comprehensive quality assurance of our products. Qualified personnel operate every aspect of our production, from the selection of raw materials right up to the final product inspection. Holy Rubber is proud to have
Hiwonder Sdn Bhd
No. 76 & 77, Jala Waja 3, Taman Industri Waja, 09000 Kulim, Kedah, Malaysia
Part of Formal Chemical Group of Companies, Hiwonder Sdn. Bhd. (492466-T) is the brainchild of the founder, Mr. Low Sew Keang. A visionary beyond his years, our founder set his sights on developing a higher quality open cellular phenolic floral foam – the result being Hiwonder’s brand of
Central Elastic Corporation Sdn Berhad
Plot 56 – 61, Solok Perusahaan 1, Prai Industrial Complex, 13609 Prai, Penang, Malaysia
Central Elastic Corporation Sdn Berhad (or CEC as we are more popularly known as) was established in 1973, and is now one of the world’s largest and best manufacturers of rubber bands offering a wide range of high quality products for packaging, stationery, industrial, technical, fishery
Gold Bell Industries Sdn Bhd
No 22, 24 & 26, Jalan Petai, Pandamaran Industrial Estate, 42000 Port Klang, Selangor Darul Ehsan, Malaysia
The plastic operation was taken over by a newly incorporated company in 1983, namely Gold Bell Industries Sdn Bhd (GBI). GBI expanded its products range, to include 20 litres and above. We have, in fact, been manufacturing plastic containers to various industries for over 50 years. We only use good
Ban Seng Plastic Industries & Assembly Sdn Bhd
Lot 503, Jalan TUDM, Kampung Baru Subang, Seksyen U6, 40150 Shah Alam, Selangor, Malaysia
Ban Seng Plastic Industries & Assembly SDN BHD is a plastics injection molding specialist providing customized molding services, consultation and cost-effective plastics solutions on a “Lean Concept”. The company upholds its staff to a total quality approach in all that it does, making it
CY-Handee Rubber Mouldings Sdn Bhd
55-12-C, Menara Northam, 12th Floor, Jln Sultan Ahmad Shah, 10050 Penang, Malaysia
As a leader in our industry, we help our customers and partners build and manage high-performance operations to rapidly achieve more efficient and effective business impact. Company: CY-Handee Rubber Mouldings Sdn Bhd Year Established: 1955 Address: 55-12-C, Menara Northam, 12th Floor, Jln Sultan
BNH Manufacturer Sdn Bhd
Lot 14887, Jalan Jelapang, Batu 11 1/2, 31200, Chemor, Perak, Malaysia, Malaysia
BNH Manufacturer Sdn. Bhd. aims to be the leading manufacturer in the region to offer top quality water storage tanks, septic tanks and road barriers and traffic cones to cater to the demanding needs of its clients from across the industries. The Company is dedicated to providing high quality
Bridge Fields Resources Sdn Bhd
49-2, Jalan USJ 10/1G, Taipan Crest47620 Subang Jaya, Malaysia
Bridge Fields Group started off in reprocessing of rubber tyres in 1998. Over the years, it has invested in Research and Development to refine the technology to enable conversion of various types of rubber scraps into high quality rubber gum for the rubber product manufacturers. In 2004, the Group
Baerlocher (M) Sdn Bhd
Lot 635 & 660, Kawasan Perindustrian, Tuanku Jaafar, 71450 Sungai Gadut, Seremban, Negeri Sembilan, Malaysia
Established in 1992, Baerlocher Malaysia, represents the Baerlocher group of companies as the leading additive supplier for the plastic industry in Asia, the Pacific Rim and the Middle East. Apart from serving the local markets over 90% of its products are exported to Indonesia, Bangladesh